Home > Hand Tools > Hammers & Chisels > Punch & Chisels > Silverline 250575 Transfer Punch 28pc Hole Punch Set 3/32”–17/32”124mmL Machinist Thread Centre Punch Marking
1/1
Share:
Silverline 250575 Transfer Punch 28pc Hole Punch Set 3/32”–17/32”124mmL Machinist Thread Centre Punch Marking
No.250575
SKU: 0906250575
(0)
AUD30.00
Use the 28pc transfer punch set from 3/32" to 17/32" to easily find the center of a threaded, drilled, tapped, or reamed hole.
For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces; Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
These tools locate the exact spot that your pilot drill bit will start when finding rifle stock screw and bolt holes or even for mandala rock painting.
The heat-treated tempered steel construction with black oxide finish prevents rounding, mushrooming, or chipping, and the points are accurately on center.
These punches leave a sufficient mark with little force – tap lightly with a hammer to locate the center and then use a center punch to finish the job.
28pc with 124mm overall length.
Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”
For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces; Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
These tools locate the exact spot that your pilot drill bit will start when finding rifle stock screw and bolt holes or even for mandala rock painting.
The heat-treated tempered steel construction with black oxide finish prevents rounding, mushrooming, or chipping, and the points are accurately on center.
These punches leave a sufficient mark with little force – tap lightly with a hammer to locate the center and then use a center punch to finish the job.
28pc with 124mm overall length.
Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”
1/1
