EDN Germany Made Carbide Tipped Circular Saw blades for Timber Aluminium Non-ferrous Metal Cutting

Your position: Home / Power, Pneumatic Tools & Accessories / Cutting Disc & Blades

Price:

AUD160.00

SKU:

Quantity:

Description
Reviews

Original from Germany. EDN brand.

EDN is located in the heart of Cronenberg and has manufactured Euronorm Standard quality saw blades for 45 years.

These Carbide Tipped Circular Saw blades for Aluminium Non-ferrous Metal have following characteristics:

Triple-chip-flat tooth saw blades

Negative tooth angle

Noise reduced through special laser slots or extension slots with blanks

For use in counterrunning against the direction of fee. For separating and mitre cuts in

window and door profiles in light alloy

solid materials in aluminium and similar alloys

plastic profiles and panel material e.g. Corian, Variocor, Resoplan, etc.

solid material as well as for profiles >5mm wall thickness

Size options:

300x3.2x35x96T

350x3.6x35x108T

400x3.6x35x120T

Attention:

It is essential to ensure faultness workpiece guidance and workpiece positioning at the correct angle to the working spindle; if possible the workpiece should be clamped.

The cutting speed should if possible not be less than 36m/sec. for aluminium profiles and not less than 30m/sec. for solid material.

Rules of thumb: The softer the material, the higher the speed! The harder the material, the lower the speed!

NE negative only use on crosscut-saws without automatic feed of the saw.