USD
EUR
GBP
CAD
AUD
HKD
JPY
RUB
CNY
SGD
NZD
FJD
Master Automotive painless Dent Repair Kit uses a special technique to repair dents in convenient way.
This repair kit restores dents in your car quickly and easily without damaging its metal and paint.
Using the principle of leverage to design the dent puller is ergonomic, the golden dent lifter with a unique can adjust the level and rotate the button to better fit the deep dents, efficiently and labor-saving.
Extensive Used: Golden dent puller suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
Protecting Original Paint: The golden dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint.
Note: This product is effective for thin metal surfaces and is not suitable for metal surfaces exceeding 1mm.
Packing list
Easy to use:
(Suit for dent&ding and home DIY repair) Step 1.Clean dent surface.
Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes.
Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
Step 4.Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
Step 5.After the glue cooling, use a golden dent lifter or bridge dent puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
Step 6.After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs.
This repair kit restores dents in your car quickly and easily without damaging its metal and paint.
Using the principle of leverage to design the dent puller is ergonomic, the golden dent lifter with a unique can adjust the level and rotate the button to better fit the deep dents, efficiently and labor-saving.
Extensive Used: Golden dent puller suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
Protecting Original Paint: The golden dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint.
Note: This product is effective for thin metal surfaces and is not suitable for metal surfaces exceeding 1mm.
Packing list
1 x Golden Dent Puller
1 x 40W Glue Gun
10 x Hot Glue Stick
34 x Blue Glue Puller Tabs
2 x Glue shovel
1 x Empty Alcohol Bottle
1 x Red Plastic Putty Knife
1 x Power Plug Adaptor
1 x 40W Glue Gun
10 x Hot Glue Stick
34 x Blue Glue Puller Tabs
2 x Glue shovel
1 x Empty Alcohol Bottle
1 x Red Plastic Putty Knife
1 x Power Plug Adaptor
Easy to use:
(Suit for dent&ding and home DIY repair) Step 1.Clean dent surface.
Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes.
Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
Step 4.Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
Step 5.After the glue cooling, use a golden dent lifter or bridge dent puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
Step 6.After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs.
You May Like
-
AUD12.00
-
AUD48.00
-
AUD30.00
-
AUD208.00
